THE10 PASSIVE WEDGE 30
The design objective for this model was to offer a pre-angled version of THE10 PASSIVE ON WALL that can be installed in multiple locations where angling the speakers is mandatory. Such locations include but are not limited to front wide, Atmos and DTS top front and rear, front or rear high surrounds, side surrounds etc.
The driver design is perfect for wide angle axi-symmetric radiation to cover a large listening area, with its 30-degree pre-angle meeting the requirements of most 3D home theater builds according to current CEDIA, Dolby and DTS specs. The very flexible speaker mounting and orientation options ensure best possible localization, immersion, and tonal balance at the main listening position while minimizing localization shifts for side seats.
THE10 PASSIVE WEDGE 30 is an enormously dynamic and powerful speaker. Its high efficiency and high-power handling allow it to reach reference volume levels and obtain an impressive cinema sound experience even with low amplifier power.
Specification
General
Speaker Type: 10” time-coherent point-source coaxial
Principle: Vented
Passive | Active: Passive
Woofer: 10” woofer
Tweeter: 1 ⅜” voice coil diameter, compression driver
Recommended ASCENDO Amplifiers: AIA2-1404,AIA2-2704, AIA4-2404, AIA8-2704, AIA8-6004
Measured Data
SPL (Half Space 2pi): Measured Data 120 dB (Cont.) / 130 dB (Peak)
Frequency Range: Measured Data (Without DSP) 100 Hz - 20 kHz / -3 dB
Power Handling: 500 W
Efficiency: 97 dB / 1 W/m 2 pi
Impedance: 8 Ω
Directivity Horizontal x Vertical in deg°: 85° x 85°
Input
Input Terminal: 4-conductor Phoenix 12 AWG (3.3 mm²)
Dimensions & Weight
Dimensions (W/H/D) mm (Without Grille): 360 | 382 | 218 (Vertical) 360 | 218 | 382 (Horizontal)
Dimensions (W/H/D) inch (Without Grille): 14 3/16 | 15 1/16 | 8 9/16 (Vertical) 14 3/16 | 8 9/16 | 15 1/16 (Horizontal)
Packing Dimensions (W/H/D) mm: 510 | 510 | 350
Packing Dimensions (W/H/D) inch: 20 1/16 | 20 1/16 | 13 13/16
Weight: 24.69 lbs | 11.2 kg
Gross Weight: 31.96 lbs | 14.5 kg
Design & Mounting
Enclosure: Internally braced MDF
Finish: Matte black / White glossy
Mounting: Metal wall or ceiling mounting brackets allowing further angling in two axes, 8 x wall mount brackets for multiple hanging options, VESA 200 x 100 mounting points
Name: The THE10 PASSIVE WEDGE 30 is supplied with a front cover as standard
THE10 PASSIVE WEDGE 30
The design objective for this model was to offer a pre-angled version of THE10 PASSIVE ON WALL that can be installed in multiple locations where angling the speakers is mandatory. Such locations include but are not limited to front wide, Atmos and DTS top front and rear, front or rear high surrounds, side surrounds etc.
The driver design is perfect for wide angle axi-symmetric radiation to cover a large listening area, with its 30-degree pre-angle meeting the requirements of most 3D home theater builds according to current CEDIA, Dolby and DTS specs. The very flexible speaker mounting and orientation options ensure best possible localization, immersion, and tonal balance at the main listening position while minimizing localization shifts for side seats.
THE10 PASSIVE WEDGE 30 is an enormously dynamic and powerful speaker. Its high efficiency and high-power handling allow it to reach reference volume levels and obtain an impressive cinema sound experience even with low amplifier power.
Specification
General
Speaker Type: 10” time-coherent point-source coaxial
Principle: Vented
Passive | Active: Passive
Woofer: 10” woofer
Tweeter: 1 ⅜” voice coil diameter, compression driver
Recommended ASCENDO Amplifiers: AIA2-1404,AIA2-2704, AIA4-2404, AIA8-2704, AIA8-6004
Measured Data
SPL (Half Space 2pi): Measured Data 120 dB (Cont.) / 130 dB (Peak)
Frequency Range: Measured Data (Without DSP) 100 Hz - 20 kHz / -3 dB
Power Handling: 500 W
Efficiency: 97 dB / 1 W/m 2 pi
Impedance: 8 Ω
Directivity Horizontal x Vertical in deg°: 85° x 85°
Input
Input Terminal: 4-conductor Phoenix 12 AWG (3.3 mm²)
Dimensions & Weight
Dimensions (W/H/D) mm (Without Grille): 360 | 382 | 218 (Vertical) 360 | 218 | 382 (Horizontal)
Dimensions (W/H/D) inch (Without Grille): 14 3/16 | 15 1/16 | 8 9/16 (Vertical) 14 3/16 | 8 9/16 | 15 1/16 (Horizontal)
Packing Dimensions (W/H/D) mm: 510 | 510 | 350
Packing Dimensions (W/H/D) inch: 20 1/16 | 20 1/16 | 13 13/16
Weight: 24.69 lbs | 11.2 kg
Gross Weight: 31.96 lbs | 14.5 kg
Design & Mounting
Enclosure: Internally braced MDF
Finish: Matte black / White glossy
Mounting: Metal wall or ceiling mounting brackets allowing further angling in two axes, 8 x wall mount brackets for multiple hanging options, VESA 200 x 100 mounting points
Name: The THE10 PASSIVE WEDGE 30 is supplied with a front cover as standard
Image 1 of 12
Image 2 of 12
Image 3 of 12
Image 4 of 12
Image 5 of 12
Image 6 of 12
Image 7 of 12
Image 8 of 12
Image 9 of 12
Image 10 of 12
Image 11 of 12
Image 12 of 12