The design objective for this model was to offer a pre-angled version of The12 BE PRO ACTIVE EXT that can be installed in multiple locations where angling the speakers is mandatory. Such locations include but are not limited to front wide, Atmos and DTS top front and rear, front or rear high surrounds, side surrounds etc.
The driver design is perfect for wide angle axi-symmetric radiation to cover a large listening area, with its 30-degree pre-angle meeting the requirements of most 3D home theater builds according to current CEDIA, Dolby and DTS specs.
The very flexible speaker mounting and orientation options ensure best possible localization, immersion, and tonal balance at the main listening position while minimizing localization shifts for side seats.
The12 BE PRO ACTIVE EXT WEDGE is an enormously dynamic and powerful speaker. Its high efficiency and high-power handling allow it to reach reference volume levels and obtain an impressive cinema sound experience even with low amplifier power.
General
Speaker Type: 12” Beryllium dome, time-coherent point-source coaxial
Principle: Vented
Passive | Active: Active, 2Ch DSP + 2Ch Amplifier are required
Woofer: 12” woofer
Tweeter: 3” voice coil diameter, Beryllium dome compression driver
Recommended Amplifiers: Low-mid 85 Vrms, 120 Vpk, 10.6 A; high 44 Vrms, 62 Vpk, 5.5 A; equivalent to LF 900 W @8 Ω, HF 240 W@ 8 Ω, with correct RMS & peak limiter settings
Recommended ASCENDO Amplifiers: DSP ULN2.2604 D
Measured Data
SPL (Half Space 2pi): Calculated data 120 dB (Cont.) / 130 dB (Peak)
Frequency Range: Calculated Data 55 Hz - 21 kHz / -3dB
Impedance: 8 Ω
Directivity Horizontal x Vertical in deg°: 85° x 85°
Input
Input Terminal: Neutrik Speakon
Dimensions & Weight
Dimensions (W/H/D) mm (Without Grille): 500 | 312 | 450 (Vertical) 500 | 450 | 312 (Horizontal)
Dimensions (W/H/D) inch (Without Grille): 19 11/16 | 17 11/16 | 12 5/16 (Vertical) 19 11/16 | 12 5/16 | 17 11/16 (Horizontal)
Packing Dimensions (W/H/D) mm: 590 | 430 | 550
Packing Dimensions (W/H/D) inch: 23 1/4 | 16 15/16 | 21 5/8
Weight: 44.09 lbs | 20 kg
Gross Weight: 52.91 lbs | 24 kg
Design & Mounting
Enclosure: Internally braced birch ply and MDF
Finish: Structural paint black
Mounting: 4 x wall brackets for horizontal and vertical installation, VESA 200 x 200 mounting option
Name: The THE12 Be PRO ACTIVE EXT WEDGE is supplied with a front cover as standard
The design objective for this model was to offer a pre-angled version of The12 BE PRO ACTIVE EXT that can be installed in multiple locations where angling the speakers is mandatory. Such locations include but are not limited to front wide, Atmos and DTS top front and rear, front or rear high surrounds, side surrounds etc.
The driver design is perfect for wide angle axi-symmetric radiation to cover a large listening area, with its 30-degree pre-angle meeting the requirements of most 3D home theater builds according to current CEDIA, Dolby and DTS specs.
The very flexible speaker mounting and orientation options ensure best possible localization, immersion, and tonal balance at the main listening position while minimizing localization shifts for side seats.
The12 BE PRO ACTIVE EXT WEDGE is an enormously dynamic and powerful speaker. Its high efficiency and high-power handling allow it to reach reference volume levels and obtain an impressive cinema sound experience even with low amplifier power.
General
Speaker Type: 12” Beryllium dome, time-coherent point-source coaxial
Principle: Vented
Passive | Active: Active, 2Ch DSP + 2Ch Amplifier are required
Woofer: 12” woofer
Tweeter: 3” voice coil diameter, Beryllium dome compression driver
Recommended Amplifiers: Low-mid 85 Vrms, 120 Vpk, 10.6 A; high 44 Vrms, 62 Vpk, 5.5 A; equivalent to LF 900 W @8 Ω, HF 240 W@ 8 Ω, with correct RMS & peak limiter settings
Recommended ASCENDO Amplifiers: DSP ULN2.2604 D
Measured Data
SPL (Half Space 2pi): Calculated data 120 dB (Cont.) / 130 dB (Peak)
Frequency Range: Calculated Data 55 Hz - 21 kHz / -3dB
Impedance: 8 Ω
Directivity Horizontal x Vertical in deg°: 85° x 85°
Input
Input Terminal: Neutrik Speakon
Dimensions & Weight
Dimensions (W/H/D) mm (Without Grille): 500 | 312 | 450 (Vertical) 500 | 450 | 312 (Horizontal)
Dimensions (W/H/D) inch (Without Grille): 19 11/16 | 17 11/16 | 12 5/16 (Vertical) 19 11/16 | 12 5/16 | 17 11/16 (Horizontal)
Packing Dimensions (W/H/D) mm: 590 | 430 | 550
Packing Dimensions (W/H/D) inch: 23 1/4 | 16 15/16 | 21 5/8
Weight: 44.09 lbs | 20 kg
Gross Weight: 52.91 lbs | 24 kg
Design & Mounting
Enclosure: Internally braced birch ply and MDF
Finish: Structural paint black
Mounting: 4 x wall brackets for horizontal and vertical installation, VESA 200 x 200 mounting option
Name: The THE12 Be PRO ACTIVE EXT WEDGE is supplied with a front cover as standard
