The design objective for this model was to offer a pre-angled version of The12 PRO PASSIVE that can be installed in multiple locations where angling the speakers is mandatory. Such locations include but are not limited to front wide, Atmos and DTS top front and rear, front or rear high surrounds, side surrounds etc.
The driver design is perfect for wide angle axi-symmetric radiation to cover a large listening area, with its 30-degree pre-angle meeting the requirements of most 3D home theater builds according to current CEDIA, Dolby and DTS specs. The very flexible speaker mounting and orientation options ensure best possible localization, immersion, and tonal balance at the main listening position while minimizing localization shifts for side seats.
The12 PRO PASSIVE WEDGE is an enormously dynamic and powerful speaker. Its high efficiency and high-power handling allow it to reach reference volume levels and obtain an impressive cinema sound experience even with low amplifier power.
General
Speaker Type: 12” time-coherent point-source coaxial
Principle: Vented
Passive | Active: Passive
Woofer: 12” woofer
Tweeter: 3” voice coil diameter, compression driver
Recommended ASCENDO Amplifiers: AIA2-2704, AIA2-6004, AIA4-2404, AIA4-6004, AIA8-6004
Measured Data
SPL (Half Space 2pi): Calculated Data 123 dB (Cont.) / 135 dB (Peak)
Frequency Range: Calculated Data 75 Hz - 21 kHz / -3 dB
Power Handling: 900 W
Efficiency: 97 dB / 1 W/m 2 pi
Impedance: 8 Ω
Directivity Horizontal x Vertical in deg°: 85° x 85°
Input
Input Terminal: Neutrik Speakon
Dimensions & Weight
Dimensions (W/H/D) mm (Without Grille): 500 | 312 | 450 (Vertical) 500 | 450 | 312 (Horizontal)
Dimensions (W/H/D) inch (Without Grille): 19 11/16 | 17 11/16 | 12 5/16 (Vertical) 19 11/16 | 12 5/16 | 17 11/16 (Horizontal)
Packing Dimensions (W/H/D) mm: 590 | 430 | 550
Packing Dimensions (W/H/D) inch: 23 4/16 | 16 15/16 | 21 10/16
Weight: 46.29 lbs | 21.0 kg
Gross Weight: 55.12 lbs | 25.0 kg
Design & Mounting
Enclosure: Internally braced birch ply and MDF
Finish: Structural paint black
Mounting: 4 x wall brackets for horizontal and vertical installation, VESA 200 x 200 mounting option
Name: The THE12 PRO PASSIVE WEDGE is supplied with a front cover as standard
The design objective for this model was to offer a pre-angled version of The12 PRO PASSIVE that can be installed in multiple locations where angling the speakers is mandatory. Such locations include but are not limited to front wide, Atmos and DTS top front and rear, front or rear high surrounds, side surrounds etc.
The driver design is perfect for wide angle axi-symmetric radiation to cover a large listening area, with its 30-degree pre-angle meeting the requirements of most 3D home theater builds according to current CEDIA, Dolby and DTS specs. The very flexible speaker mounting and orientation options ensure best possible localization, immersion, and tonal balance at the main listening position while minimizing localization shifts for side seats.
The12 PRO PASSIVE WEDGE is an enormously dynamic and powerful speaker. Its high efficiency and high-power handling allow it to reach reference volume levels and obtain an impressive cinema sound experience even with low amplifier power.
General
Speaker Type: 12” time-coherent point-source coaxial
Principle: Vented
Passive | Active: Passive
Woofer: 12” woofer
Tweeter: 3” voice coil diameter, compression driver
Recommended ASCENDO Amplifiers: AIA2-2704, AIA2-6004, AIA4-2404, AIA4-6004, AIA8-6004
Measured Data
SPL (Half Space 2pi): Calculated Data 123 dB (Cont.) / 135 dB (Peak)
Frequency Range: Calculated Data 75 Hz - 21 kHz / -3 dB
Power Handling: 900 W
Efficiency: 97 dB / 1 W/m 2 pi
Impedance: 8 Ω
Directivity Horizontal x Vertical in deg°: 85° x 85°
Input
Input Terminal: Neutrik Speakon
Dimensions & Weight
Dimensions (W/H/D) mm (Without Grille): 500 | 312 | 450 (Vertical) 500 | 450 | 312 (Horizontal)
Dimensions (W/H/D) inch (Without Grille): 19 11/16 | 17 11/16 | 12 5/16 (Vertical) 19 11/16 | 12 5/16 | 17 11/16 (Horizontal)
Packing Dimensions (W/H/D) mm: 590 | 430 | 550
Packing Dimensions (W/H/D) inch: 23 4/16 | 16 15/16 | 21 10/16
Weight: 46.29 lbs | 21.0 kg
Gross Weight: 55.12 lbs | 25.0 kg
Design & Mounting
Enclosure: Internally braced birch ply and MDF
Finish: Structural paint black
Mounting: 4 x wall brackets for horizontal and vertical installation, VESA 200 x 200 mounting option
Name: The THE12 PRO PASSIVE WEDGE is supplied with a front cover as standard
